Edison M.
Sysops Engineer
500 dollar
Freelancer
10 years
León, MEXICO
My experience
More
Magna InternationalSeptember 2017 - Present
Support to T1XX project to Material Handling and Mig Robots, create new programs with Magna standards about interferences zones, tool zones (also on PLC AB 5000), Setup and Creation of welding parameters to get a good Welding Penetration Standard.
Mapping Digital I/O. Creation of new projects in Robot FANUC r30ib like:
- I create Users Levels and Acces to Fanuc Menus using XML programming.
- I create a project to ensure quality Welding and it this that Just weld Techs can move robot angles and Weld Parameters and Robotic another advanced tasks.
- I create a project to Stop the Robot when the Welding starts to be perforated using System Variables.
- I create Automatic Gas Purge in a specific Hour without use the PLC. Send signals from Robot to PLC like Motor Torque G2, UOP signals, Weld Length etc.
- I create a project to Enable and Disable DCS robot without using PLC to drop the rail part in tooling Work and not in other space in case somebody open the robot clamps accidentally and can hurts somebody.
- Improvements on Site to reduce Time Cicle. Like: Porgramming Pounce in the Robots. balance the Quantity of Weld in robots.
Mapping Digital I/O. Creation of new projects in Robot FANUC r30ib like:
- I create Users Levels and Acces to Fanuc Menus using XML programming.
- I create a project to ensure quality Welding and it this that Just weld Techs can move robot angles and Weld Parameters and Robotic another advanced tasks.
- I create a project to Stop the Robot when the Welding starts to be perforated using System Variables.
- I create Automatic Gas Purge in a specific Hour without use the PLC. Send signals from Robot to PLC like Motor Torque G2, UOP signals, Weld Length etc.
- I create a project to Enable and Disable DCS robot without using PLC to drop the rail part in tooling Work and not in other space in case somebody open the robot clamps accidentally and can hurts somebody.
- Improvements on Site to reduce Time Cicle. Like: Porgramming Pounce in the Robots. balance the Quantity of Weld in robots.
More
KIA Motors MéxicoDecember 2016 - September 2017
Trouble shooting for PLC siemens 300 programs and Robots issues as mechanical as electronic.
I supervise 14 technician and one Team Leader and also and create the Work Orders activities on SAP, Extra Time, Vacations, Technician Schedules.
Manage the maintenance of specialized equipment, such as PLC and Robots, and help develop the skills of the technical staff to improve maintenance break downs.
I also create reports for KIA president when there is a failure over 20 minutes.
I supervise 14 technician and one Team Leader and also and create the Work Orders activities on SAP, Extra Time, Vacations, Technician Schedules.
Manage the maintenance of specialized equipment, such as PLC and Robots, and help develop the skills of the technical staff to improve maintenance break downs.
I also create reports for KIA president when there is a failure over 20 minutes.
More
ATS AutomationDecember 2015 - December 2016
I worked for a couple of days in Chrysler Toluca for JC500 project, in this project I used NACHI ROBOTS for spot welding and FANUC ROBOT for MIG WELDING.
I went to warren Detroit for training NACHI ROBOTS and to ECATEPEC MEXICO city for servo gun training with NACHI ROBOTS.
I went to QUERETARO city in MEXICO to give support about MOTOMAN ROBOT DX200 and SMART VISION SYSTEM to detect some parts of the ARM REST TRUCKS.
1-Robots simulations ABB, FANUC, MOTOMAN, KUKA
2-Visions system IR Vision FANUC and Cognex
3-Spot welding Process
4-Mig Welding Process
5-Pick and Place, Drop
6- Sealing
7-Hardware Installation
8-Download OLP to the controller NACHI, KUKA, ABB, FANUC, MOTOMAN
9-Setup Communications
10-Data sheet Validation
11- Safe Cycle time
12- Payload Validation
13- Backups
I went to warren Detroit for training NACHI ROBOTS and to ECATEPEC MEXICO city for servo gun training with NACHI ROBOTS.
I went to QUERETARO city in MEXICO to give support about MOTOMAN ROBOT DX200 and SMART VISION SYSTEM to detect some parts of the ARM REST TRUCKS.
1-Robots simulations ABB, FANUC, MOTOMAN, KUKA
2-Visions system IR Vision FANUC and Cognex
3-Spot welding Process
4-Mig Welding Process
5-Pick and Place, Drop
6- Sealing
7-Hardware Installation
8-Download OLP to the controller NACHI, KUKA, ABB, FANUC, MOTOMAN
9-Setup Communications
10-Data sheet Validation
11- Safe Cycle time
12- Payload Validation
13- Backups
More
MubeaJune 2014 - September 2015
I createt two grippers for Two Motoman Robot DX100 controllers to take the coils springs we produce for several clients.
I programmed in PLC Beckhoff cx1100, 4 analogue pression sensor from 1 to 16 bars to measure the pressure of four bomb waters motors.
I implement the RCM Predictive Maintenance for all the motors of differents horse power with GUN TERMOGRAPHI FLUKE.
I programmes two cortains light to count all the coils springs we produced in each ship and how many we lost in each ship. The courtains were installed in a paint line conveyor by the technician I had each ship.
I programmed in PLC Beckhoff cx1100, 4 analogue pression sensor from 1 to 16 bars to measure the pressure of four bomb waters motors.
I implement the RCM Predictive Maintenance for all the motors of differents horse power with GUN TERMOGRAPHI FLUKE.
I programmes two cortains light to count all the coils springs we produced in each ship and how many we lost in each ship. The courtains were installed in a paint line conveyor by the technician I had each ship.
More
PepsiCoJanuary 2014 - June 2014
I was working in maintenance area like a predictive technician to motor from 1/4 hp to 250 hp and changes fast to motors, oarlock, velocity engine reductors, arrows for motors. Main functions: Creates and give predicitve maintenances and some preventives maintenance for the technician maintenance employe.
More
Aguas de SaltilloMarch 2012 - March 2014
Achievements: Creation of LAN networks, installation of SERVERS 2008, installation of Hard Disk Network,Program bomb waters motor in PLC Telemecahnique m340. Installation of some repeaters in towers of 50 mts High to communicate PLC'S from Saltillo to Derramadero city.
Main functions:
Support to coomputers in Hardware and Software.
Create Lan Networks, domains and new ip address for the new computers
Manage switch Lan for the protection of the factory
Main functions:
Support to coomputers in Hardware and Software.
Create Lan Networks, domains and new ip address for the new computers
Manage switch Lan for the protection of the factory
More
Jhonson Control IncAugust 2010 - December 2010
Jhonson Controls is a plastic injection factory.
I worked in Jhonson Controls like Robot Junior, I create some arm tools for Robots ABB IRB2600, FANUC 200ic, Robot Tracer, Robot Star, Robot SEPRO all of them were use for several kind of injection molds.
I also create new programs for all the robots for the news number parts or styles, our most important clients were GM, CHRYSLER, FORD.
I worked in Jhonson Controls like Robot Junior, I create some arm tools for Robots ABB IRB2600, FANUC 200ic, Robot Tracer, Robot Star, Robot SEPRO all of them were use for several kind of injection molds.
I also create new programs for all the robots for the news number parts or styles, our most important clients were GM, CHRYSLER, FORD.
My stack
Other
software support, SMART VISION SYSTEM, Cognex, Mig Robot, BECKHOFF CX1100, SMART VISION KORTEX, KGONEX VISION INSIGHT EXPLORER, KUKA, Problem resolution, Robot Tracer, SIEMENS 300, Hardware Installation, SEPRO, TRACER, Roboguide simulation, Robot studio simulation, NACHI Robots, Robot Star, Robot SEPRO, LAN networks, MOTOMAN, PLC Beckhoff cx1100, FANUC, RCM Predictive Maintenance, maintenance, Server Installation, hardware support, Continuous Improvement, Programmable Logic Controller
Others
Troubleshooting, Team management, Technical Support, Robotics
Industrial automation
ABB
ERP&CRM
SAP
IT Infrastructure
LAN
Technologies
Integration
Languages
XML
My education and trainings
Engineer, Mechatronics Engineer - Universidad Tecnologica de Coahuila
Take a look at some similar profiles
Ahmed S.
Sysops Engineer
| Contract type | Freelancers |
|---|---|
| Daily rate | 790$/day |
| Experience | 8 years |
| Location | France |
Auguste M.
Sysops Engineer
| Contract type | Freelancers |
|---|---|
| Daily rate | 690$/day |
| Experience | 25 years |
| Location | France |
Mohamed Lamine B.
Sysops Engineer
| Contract type | Freelancers |
|---|---|
| Daily rate | 115$/day |
| Experience | 14 years |
| Location | Tunisia |
Elmi I.
Sysops Engineer
| Contract type | Freelancers |
|---|---|
| Daily rate | 765$/day |
| Experience | 12 years |
| Location | United Kingdom |
Gilles N.
Sysops Engineer
| Contract type | Freelancers |
|---|---|
| Daily rate | 830$/day |
| Experience | 23 years |
| Location | France |
James D.
Sysops Engineer
| Contract type | Freelancers |
|---|---|
| Daily rate | 460$/day |
| Experience | 9 years |
| Location | United Kingdom |
Cristian S.
Sysops Engineer
| Contract type | Freelancers |
|---|---|
| Daily rate | 435$/day |
| Experience | 10 years |
| Location | Romania |
Levente D.
Sysops Engineer
| Contract type | Freelancers |
|---|---|
| Daily rate | 435$/day |
| Experience | 21 years |
| Location | Romania |
Cezar C.
Sysops Engineer
| Contract type | Freelancers |
|---|---|
| Daily rate | 435$/day |
| Experience | 14 years |
| Location | Romania |
Amadou D.
Sysops Engineer
| Contract type | Freelancers |
|---|---|
| Daily rate | 435$/day |
| Experience | 8 years |
| Location | France |
Vlad-Ioan H.
Sysops Engineer
| Contract type | Freelancers |
|---|---|
| Daily rate | 435$/day |
| Experience | 11 years |
| Location | Romania |
Marcel S.
Sysops Engineer
| Contract type | Freelancers |
|---|---|
| Daily rate | 500$/day |
| Experience | 17 years |
| Location | Romania |
Partners
