Elias L.

EMBEDDED SOFTWARE DEVELOPER

674 euro

My experience

More

Applus+ LaboratoriesJanuary 2019 - Present

πŸ“Œ Application of national and international standards, mainly in components for the automotive and naval/military sectors.
πŸ“Œ Perform EMC tests in semianechoic chamber in the RF scope (conducted and radiated emissions, radiated immunity, bulk current injection...).
πŸ“Œ Assemble specifics setups according to the aplicable norms, test plan and Equipment Under Test (EUT) requirements.
πŸ“Œ Configuration and management of equipment for controlling and monitoring the EUT (oscilloscopes, data acquisition/mutimeter, CAN/LIN modules, CANoe SW, arbitrary generators, UPVs, cameras, specific load boxes...).
πŸ“Œ EMC test report creation and fulfillment for validation and development projects.
πŸ“Œ EMC test equipment configuration (SW EMC32, RF immunity racks, RF Amplifiers, RF cables...).
πŸ“Œ Safety evaluation of the tests setups and configurations for the personal and the equipment used.
More

Courtney WingsJanuary 2018 - September 2018

πŸ“Œ Work with the product design team to document and implement requirements.
πŸ“Œ Code, build and test Software.
πŸ“Œ Analyze and resolve the design issues in prototype stage to meet all specification requirements and delivery time to market.
More

Uniled iluminación (lighting factory)January 2014 - January 2017

πŸ“Œ Worked with the product design team to document and implement requirements.
πŸ“Œ End to end system verification testing.
πŸ“Œ Coded, built and tested embedded software.
πŸ“Œ Schematic design. Including components selection, circuit capture, DRC check and BOM export.
πŸ“Œ PCB layout. Including PCB stack up definition, component placement, detailed routing rule checking.
πŸ“Œ Support the contract manufacturer for PCB Gerber and manufacturing files.
πŸ“Œ Board design verification, system reliability validation and compliance tests.
πŸ“Œ Analyze and resolve the design issues in prototype stage to meet all the specification requirements and delivery time to market.
πŸ“Œ Participation in I+D+I projects in industrial ambit (stress reduction lighting for poultry farms , fungicide lighting, indoor vegetable crops lighting ...).
πŸ“Œ Developed, built and maintained a computer numerical control (CNC) system for resine injection.
More

DEKRA Testing and Certification, S.A.U.January 2013 - January 2014

πŸ“ Maintenance of software application used in the automation of the certification tests for slot machines.
πŸ“Œ Tested the previous version program.
πŸ“Œ Debugged the previous versions of the program.
πŸ“Œ Documented de programming progress.
πŸ“Œ Managed version control.
πŸ“Œ Recollected the requirements from the final users.
πŸ“Œ Added new functionalities.Β 

πŸ“ Support at the calibration department for the setup, documentation and realization of calibrations for equips used in environmental tests (temperature and humidity probes, climatic chambers, ovens and salt fog chambers).

My stack

WIFI, VHDL, Verilog, Test Planning, Software Development, Software Design, RTOS, Python, Problem Solving, PCB Design, Microcontrolers, Matlab, FPGA, Firmware, Embedded Systems, Embedded C/C++, Eagle, Digital Signal Processing, Digital sensors, Debugging, Data analysis, CANoe, Assembly